BENYAMIN Luxury Home: Interior Design Concept with Marble, Velvet and Glass
At a glance
BENYAMIN Luxury Home is a design concept that Sagist Group prepared for a private residence with a 3.00 m ceiling height. It covers 11 spaces: an open living, dining and kitchen area, two bedrooms, two bathrooms, a private hallway, a covered terrace, a Mediterranean garden, a covered entrance and a pool with sun deck.
The palette pairs a pearl-cream base with walnut-effect joinery, cream and grey-beige marble, clear and smoked glass, polished stainless steel and olive, taupe and burgundy accents. Everything shown here is a proposal. Materials, dimensions and details are confirmed later, during measured coordination and specification.
Type: private residence, interior and outdoor design concept
Spaces: 11, each shown in two concept views (22 images)
Ceiling height: 3.00 m, the design parameter supplied by the client
Proposed materials: MDFlam, marble, glass and mirrors, stainless steel, velvet, glossy faux leather
Lighting: warm white of about 3000 K, in layers
Status: design concept, ahead of measured survey and technical detailing
About the images
The 22 images are concept visualisations at 1448 × 1086 pixels (4:3). They show the intended atmosphere and material direction, not a finished home or a measured 3D model. Furniture positions and openings can differ between views.
The design idea: reflective elegance
The brief called for a home that feels bright and calm without turning cold. Our answer was to let reflective surfaces carry the light and then balance them with materials that invite touch. Marble, glass and polished metal reflect daylight and lamplight. Walnut-effect cabinetry, velvet upholstery and soft rugs bring warmth back into the rooms.
Curved seating breaks up the straight lines of the open plan. The same pearl-cream base runs through every room, so the house reads as one composition, while each bedroom gets its own accent colour.
Looking ahead, we expect this direction to gain ground in 2027: warm neutrals, softer curves and tactile fabrics combined with a restrained amount of shine. That is our outlook, not a forecast anyone can guarantee, and the concept is designed to stay comfortable whatever the trend cycle does.
Designing for a 3.00 m ceiling
A 3.00 m ceiling gives generous volume without the scale of a double-height space. The concept uses full-height cabinetry to draw the eye upward and make storage feel built in rather than added. Ceiling details stay shallow, so coves can hide indirect light while the rooms keep their proportions. Pendants and wall lights are scaled to the room height rather than to a grand hall.
Room by room
Each space below is shown in two concept views. Where the supplied plan gives an area, we quote it as a plan reference. These figures still need to be confirmed by a measured survey.
01 · Living and dining
The living and dining area is the social heart of the home. Curved cream seating softens the layout and olive velvet adds depth. A marble dining table links the lounge to the kitchen without visually splitting the open space.
Proposed elements include a walnut-effect MDFlam media wall, a floating cabinet, marble-topped side tables and glazed openings to the terrace. Rugs and upholstery balance the reflective surfaces. The supplied drawing gives differing area labels for this open-plan room, so its final area will be verified before any costing.
02 · Kitchen
The kitchen is planned as part of the living space rather than a separate room. Pearl gloss fronts, walnut-effect tall units and expressive marble give it a polished, integrated look. A compact island-style breakfast counter offers an informal seat and keeps the view to the dining table open.
The concept proposes melamine-faced MDF cabinetry, a marble worktop and splashback, integrated appliance housings, stainless-steel details and glossy faux-leather stools. Counter layout, appliance clearances and service connections will follow the measured plan.
03 · Bedroom 01
Bedroom 01 is built around an olive velvet headboard, cream upholstery and slim marble accents. Full-height wardrobes use the wall area efficiently, and smoked-glass panels give them a boutique-hotel character.
The proposal includes a double bed, compact bedside storage, walnut-effect MDFlam wardrobes, a slim dressing console and soft bedside lighting. Final bed and cabinet sizes depend on verified circulation space.
Plan reference: 12.33 m² (from the supplied plan, not a measured survey).
04 · Bedroom 02
Bedroom 02 shifts to champagne and taupe tones with soft velvet and walnut-effect cabinetry. A restrained burgundy accent gives the room its own identity within the shared material language.
An upholstered bed, glass-front wardrobe sections, a compact dressing surface and warm indirect light are proposed. Furniture is proportioned for a compact room, not an oversized suite.
Plan reference: 11.49 m² (from the supplied plan, not a measured survey).
05 · Bathroom 01
Bathroom 01 takes a spa-like approach: cream marble, clear shower glass and a floating walnut-effect vanity, with an illuminated mirror as the soft focal point and polished metal fittings.
A walk-in shower is proposed instead of a freestanding bath. Vanity units need moisture-resistant components and protected edges. Floor finish, waterproofing and drainage will be specified for wet-area use.
Plan reference: 6.21 m² (from the supplied plan, not a measured survey).
06 · Bathroom 02
Bathroom 02 works in warm grey-beige stone tones and pearl gloss. A floating vanity, a tall illuminated mirror and a transparent shower screen keep the room light and uncluttered.
Marble surfaces, moisture-resistant cabinetry, glass and stainless-steel details are proposed. Slip resistance, ventilation, electrical safety zones and service access belong to the technical design stage.
Plan reference: 5.76 m² (from the supplied plan, not a measured survey).
07 · Private hallway
The private hallway is a short transition from the shared living space to the bedrooms. Flush doors, a narrow mirror and a continuous light floor make it read as one clear passage.
Pearl and walnut-effect surfaces continue the main palette. The passage stays free of furniture, and door swings and clear widths will be checked against the measured layout.
Plan reference: 1.46 m² (from the supplied plan, not a measured survey).
08 · Covered terrace
The covered terrace extends the living room outdoors, with cream seating, stone tables and Mediterranean planting. It combines a relaxed lounge with an outdoor dining spot and warm evening light.
Outdoor-rated upholstery, corrosion-appropriate metalwork and slip-resistant paving are proposed. Interior MDFlam is not intended for exposed outdoor use, so exterior-grade alternatives are required here.
Plan reference: 27.93 m² (from the supplied plan, not a measured survey).
09 · Mediterranean garden
Olive trees, aromatic planting and sculptural stone seating form an intimate garden around the house. The soft greens echo the velvet tones inside and tie the rooms to the landscape.
Planted areas sit alongside a paved seating zone with low-level lighting and stone edging. Plant choice, irrigation, drainage and any retaining structures depend on local site conditions.
10 · Covered entrance
The covered entrance introduces the home's palette before the front door opens: cream stone, walnut tones, polished metal, a compact bench and a planted accent.
Exterior-rated finishes and durable seating are proposed. The shared approach, the exterior stairs and step-free access will be coordinated with the existing building.
Plan reference: 9.26 m² (from the supplied plan, not a measured survey).
11 · Pool and sun deck
Turquoise water, cream loungers and warm stone turn the pool area into a relaxed outdoor retreat. Stainless-steel details and Mediterranean planting carry the house's palette outside.
The supplied plan shows the pool on a lower level, connected to the residence by exterior circulation. Levels, retaining walls, guarding, pool safety and equipment are part of the technical and landscape design.
Plan reference: 31.28 m² (from the supplied plan, not a measured survey).
Proposed material palette
These materials describe the design intent. Product codes, physical samples, thicknesses, hardware and finishes are agreed during specification. Visible wood grain means a decorative finish unless solid timber is specified.
MDFlam (melamine-faced MDF)
Proposed for fitted wardrobes, media cabinetry, kitchen furniture and selected wall panels, in pearl and walnut-effect finishes. MDFlam is melamine-faced MDF. It is not solid walnut or lacquered MDF, and a true high-gloss look may need a dedicated gloss-faced board. Gloss level and edging are chosen from physical samples.
Marble
Proposed for worktops, tables, statement surfaces and bathroom cladding, with cream and warm grey-beige veining. The images show a direction, not a selected quarry or slab. Wet and outdoor floors need a slip-resistant finish, and natural stone needs sealing and care.
Glass and mirrors
Clear shower screens, smoked-glass wardrobe doors and mirrors add lightness and depth. Tint, framing, thickness and safety treatment are selected for each location.
Stainless steel
Mirror-polished stainless steel is proposed for slim frames, handles and accents, with champagne-toned PVD as a selective option. Grade and finish depend on whether the part sits indoors, in a wet area or outside.
Velvet
Olive and taupe velvet add tactile contrast on chairs, headboards and soft furnishings. Fabric composition, abrasion performance, cleanability and any fire requirements are confirmed at product selection.
Glossy faux leather
Ivory faux leather is proposed for selected stools and accent seats. Its smooth surface suits the pearl cabinetry and polished metal. The final product must suit cleaning and wear, and outdoor seating needs a separate outdoor-rated specification.
Lighting: composed for day and evening
The concept proposes one warm-white tone, about 3000 K, across ceiling coves, cabinet lighting, pendants and bedside lights. Decorative light is balanced with task light at the kitchen counter, mirrors and work surfaces.
The images show the intended mood. They are not a calculated lighting installation. Light output, colour rendering, dimming, glare control and electrical details come from the coordinated lighting design.
From concept to specification
Measured coordination: confirm room dimensions, openings, ceiling levels and service positions.
Material approval: review physical samples, gloss levels, stone slabs, glass and upholstery.
Technical detailing: prepare furniture drawings, hardware details, lighting interfaces and quantities.
Project proposal: agree the final scope, price, delivery programme and installation responsibilities.
Why Sagist Group
Sagist Group designs and manufactures bespoke furniture and delivers turnkey interiors for private residences, villas, hotels, restaurants and offices from its head office and production in Istanbul. Since 1996 the company has grown into a group that exports to 73 countries. For residential work like BENYAMIN, see our luxury home furniture and villa furniture pages, or read how we approach marble and lacquer kitchens and curved living and dining furniture.
Talk to us about your residence
If you are planning a residence and would like to develop a concept like BENYAMIN into drawings, samples and a project proposal, contact our Istanbul head office.
Address: Mareşal Fevzi Çakmak Cad. No:116-118, Ferhatpaşa, Ataşehir, 34888 Istanbul, Türkiye
Phone / WhatsApp: +90 553 720 66 17
Email: info@hotelmobilya.com
Contact page: hotelmobilya.com/contact
Comments