top of page

Specifying Hotel and Residence Furniture for Kazakhstan: Continental Climate and EAC Compliance

23 hours ago
7 min read

Updated: 3 hours ago

Specify for two things at once. The first is a climate that averages around -16°C in an Astana January and then dries every heated room to desert levels. The second is paperwork: furniture sold in Kazakhstan falls under the Eurasian Economic Union's technical regulation TR CU 025/2012, which means a declaration of conformity, an EAC mark and Russian-language labelling. Put both into the specification before the mock-up room is approved, not after a container is already on the Caspian.


Key takeaways

  • Almaty has about 70 hotels under construction (almost 8,000 rooms, due by 2028) against a luxury chain stock of only 659 rooms.

  • Frame-and-panel construction, solid lippings, balanced veneers and wider tolerances matter because heated interiors swing in humidity every winter.

  • Furniture for hotels and homes is normally cleared by declaration under TR CU 025/2012. Children's and school furniture needs a certificate. Labels must be in Russian.

  • Import duty in the tariff lines we checked ran at roughly 8 to 10 per cent, import VAT is 16 per cent, and the rail-and-sea route from Türkiye averages 20 to 25 days door to door. Confirm every figure against your own tariff codes.

  • Mock-up first. A changed drawing costs a day; a changed carcass on site costs a season.


Step 1: Read the pipeline before you read the brochure

According to the Astana Times, foreign arrivals reached 15.7 million in 2025, up from 9.2 million in 2023, and capital spending in tourism hit 1.25 trillion tenge.

Almaty is where the supply gap shows most clearly. Cushman & Wakefield's March 2026 Central Asia luxury report puts the city's chain-affiliated stock at about 2,567 rooms, of which only 659 are luxury, and notes that branded hotels averaged 69.5 per cent occupancy in 2024, the highest on record. Named luxury projects there include a 95-room Vignette Collection due in 2027 and a roughly 200-room St. Regis tower. Bizmedia reported in April 2026 that around 70 more hotels, close to 8,000 rooms, were under construction in the city.

Three threads are worth following for a furniture buyer:

  • Alatau City. The announced Iconic Towers scheme includes an 80-storey, 272 m tower planned as a five-star hotel, scheduled for the end of 2029, with private investment above $800 million, according to Kursiv. Lotte Hotels & Resorts is being considered for a role.

  • Lotte in Almaty. Kursiv reported on 15 September 2026 that Hotel Lotte and Sensata Invest had exchanged memorandums of understanding on hotels in Almaty and Alatau City. An August report from the same outlet described the Almaty project as still at the document-collection stage with the Development Bank of Kazakhstan. A signal, not a tender.

  • Almaty SuperSki. The government targets December 2028: 17 lifts, more than 60 km of slopes and a 20-hectare mountain village. Hotel and bed counts are unpublished, so furniture packages are still ahead.


Residential follows the same pattern. Forbes Kazakhstan profiles the Swiss Collection in Astana: 649 apartments, 137 branded Swissôtel residences and a five-star hotel. That means hotel-grade joinery inside private homes.


Step 1: Read the pipeline before you read the brochure – Sagist Group

Step 2: Specify for the winter inside the building

Almaty's January averages about -8°C at night and just above freezing by day; Astana averages about -16°C, with records near -50°C. The cold itself is not the problem. Months of heating to 20°C and above is. In Almaty, the heating season is triggered when the average daily temperature stays at or below +8°C for five consecutive days, and hotels are connected in the second wave, after schools and hospitals. Indoor humidity in a sealed heated suite commonly falls far below what the timber was dried for, and then rises again in spring. Typical rather than guaranteed, but plan for it.

What that means in practice:

  1. Frame-and-panel over large flat slabs. Doors, wardrobe fronts and headboard panels should float in a frame so they can move without cracking the finish.

  2. Solid lippings on veneered cores. Thin edge-bands lift first in dry air.

  3. Balanced veneers on engineered cores, with the same species and thickness on both faces. Specify kiln-dried solid timber at a moisture content suited to heated interiors; 8 to 10 per cent is a common target.

  4. Wider reveals. Avoid long unbroken runs of tight shadow gaps.

  5. Wool and natural-fibre upholstery where the brief allows. Synthetics build static in dry rooms, and TR CU 025/2012 sets a 15.0 kV/m electrostatic field limit for seating and lying furniture.

  6. Contract wear. Martindale 40,000 rubs minimum for guest seating, higher for lobby and bar. Specify high-resilience foam by density and hardness.

  7. Stone and metal at entrances. Honed, sealed stone and powder-coated metal cope better with the swing between freezing vestibules and heated lobbies.

  8. Acclimatise on site. Leave joinery in the heated building for several days before final fitting.


On the Caspian coast around Aktau the problem flips. The air is salty and the summers are hot, so exterior metalwork should be 316 stainless or coastal-grade powder-coated aluminium, with stainless hardware rather than zinc-plated, and isolated fixings where aluminium meets steel.


Step 3: Treat EAC compliance as a design input

TR CU 025/2012 covers household and public-premises furniture, including custom-made pieces. It applies across the Union, Kazakhstan included. Our reading of the text:

  • Declaration or certificate. Household and public-premises furniture, which includes hospitality furniture, is generally cleared by declaration of conformity. Children's, school and preschool furniture needs mandatory certification.

  • Validity. Declarations and certificates may be issued for up to five years.

  • Fire. Upholstery textiles and leather for seating and lying furniture must not be easily flammable or fall into toxicity group T4, and the accompanying documents must state the fire hazard. International operators commonly layer their own brand standard on top, such as BS 5852 Crib 5 or California TB 117-2013.

  • Chemical emissions. No first-hazard-class substances; other volatiles within the Appendix 3 limits.

  • Marking. The EAC mark goes on a non-removable part of each piece and on the accompanying documents. The label must be in Russian and carry the product designation, trademark, country of origin, manufacturer, importer or authorised-person details, manufacture date, warranty period and service life.


Line up a Kazakh importer of record before production and confirm the scheme with an accredited certification body. This is a procurement guide, not legal advice.

Step 4: Build the landed cost, line by line

Türkiye has no preferential trade agreement with the Eurasian Economic Union that we found in the sources reviewed, so assume the Union's common customs tariff applies. Rates vary by tariff line. In the Chapter 94 lines we checked, a wooden dining or living-room line carried 10 per cent and a metal furniture line 8 per cent, while some lines carry per-kilogram alternatives for low-value-per-kilo goods. Kazakhstan's standard VAT rose from 12 to 16 per cent on 1 January 2026 under the new Tax Code.

Cost line

What to confirm

Ex-works or FOB price

Incoterm, packing and crating included or not

EAC declaration

Scheme, applicant, lead time, validity

Russian-language labels

Printed per piece before shipping

Freight and insurance

Rail-and-sea vs road; insure at replacement value

Import duty

Ten-digit tariff code per item group, not per project

Import VAT

16 per cent; check recoverability with your tax adviser

Broker, port and inland leg

Aktau or border, then Almaty, Astana or Shymkent

Installation and snagging

Timed to the heating season


Step 4: Build the landed cost, line by line – Sagist Group

Step 5: Plan the route and the calendar

KTZ Express runs a rail-and-sea chain from Köseköy in Türkiye through Kars and Tbilisi to the port of Alyat near Baku, across the Caspian to Aktau, and on by rail to the Almaty region. It quotes an average door-to-door time of 20 to 25 days. Road options with a Caspian crossing exist too, but we have not verified their transit times, so ask your forwarder for a dated schedule. The Caspian crossing is the usual bottleneck; build in buffer.

Specify ISPM 15 heat-treated wood packaging, desiccant and moisture barriers for winter movements, and a load plan built around a 40 ft high-cube of roughly 76 m³. DAP to site suits turnkey work.

Sagist Group, for example, has built bespoke hotel and residential joinery in Istanbul since 1996, keeps core production in-house across five factories, and builds a mock-up room, typically in two to four weeks, before production starts. The programme from signed contract and approved samples to installation is typically 20 to 30 weeks, and the published warranty is two years standard, five years on project work and up to ten years on exclusive turnkey packages (confirmed per contract).

Fairs: AstanaBuild (Astana, listed for 28 to 30 April 2027) and KazBuild (Almaty, listed for early September 2027). Both dates come from third-party calendars; check the organisers.

Frequently asked questions

Do I need EAC certification for hotel furniture imported into Kazakhstan? You need conformity documents under TR CU 025/2012 and an EAC mark. For hotel and residential furniture that is normally a declaration of conformity; children's, school and preschool furniture requires a certificate.

What is the import duty on furniture from Türkiye to Kazakhstan? Kazakhstan applies the Eurasian Economic Union's common customs tariff, and we found no preferential agreement for Türkiye. In the Chapter 94 lines we checked, rates were roughly 8 to 10 per cent, with per-kilogram alternatives on some. Import VAT is 16 per cent. Check each code with a broker.

How long does shipping from Istanbul to Almaty take? KTZ Express quotes an average of 20 to 25 days door to door on its rail, Caspian ferry and rail chain via Georgia, Azerbaijan and Aktau. Add buffer for the Caspian crossing.

Which materials suit Kazakhstan's heated interiors? Frame-and-panel construction, solid lippings, balanced veneers on engineered cores, kiln-dried timber, honed sealed stone and wool-rich upholstery. The risk is dry heated air, not the cold outside.

Which hotel projects in Kazakhstan are planned for 2027 to 2029? Almaty has a 95-room Vignette Collection due in 2027. Almaty SuperSki targets December 2028 and the Alatau City Iconic Towers hotel the end of 2029. Lotte's memorandums for Almaty and Alatau City are not yet contracts.

Frequently asked questions – Sagist Group

Talk to us

For hotel and resort programmes, see our hotel furniture division. For corporate headquarters and executive floors, see the office furniture division. To discuss a Kazakhstan project, contact us or message us on WhatsApp. We offer a factory visit in Istanbul or a remote live-video factory review.

Written by Metin Durmaz (Architect & CEO) · Reviewed by Mustafa Dokumacı (Technical Architect, Production)

Written by: Metin Durmaz (Architect & CEO) · Reviewed by: Ayça Öztürk (Lead Architect & Director of Space)

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page